Wednesday, July 25, 2012

All set to take over the world

...Now that my army of tiny NaNoBots is complete! Mwahahahaha

I really have to stop checking in on what the other NaNoWriMo MLs are up to, because it just leads to inspiration and that leads to projects that I really don't have time for. But they're fun!

They don't need to sleep. They just do. And do. And do. And some of them even smile about it.

So how does one go about raising an army of their own?

First, visit your local robot part outlet. Mine happened to be called Hobby Lobby.

You'll need two sizes of wooden blocks. I used 1 inch and 3/4 inch. There are smaller sizes, if you want really little bots, just keep in mind that you'll need to find hand and feet parts that are equally sized.

I picked dowel hole plugs for the head knobs, 1/8 dowels for the arms and legs, wooden balls for the hands and some little rounded dowel part for the feet.

I cut the dowels at 3/4 inch using a wire cutter. They snap off really easy. You will need to sand the cut edges to get a good base for the other parts to attach to.

Using hot glue (because I really didn't have time to sit around while stuff dried), I attached the head knobs on the smaller block and then glued the smaller block to the larger one.

Things got rather assembly line after that. Attach the arms to the hands and the legs to the feet.

Because I was doing thirteen of these (the max I could do with the pieces I had purchased), I assembled all the arms and legs before moving on.

The easiest way to assemble the feet is to set them both side by side and put a drop of glue on top of them. Set the block body on top of the feet and adjust as necessary until the bot stands up.

If the legs are mostly in the middle section of the block, it has a pretty good chance of standing on the first try. Making sure the legs are generally the same size would be a good idea too, if you're going for a uniform look. My army is a little haphazard. I'm okay with that.

Once my robots were assembled--all thirteen took about an hour from opening the supplies to figuring out the first one to gluing on the last leg.

Removing all the glue blobs and stringy bits would be a good idea at this point.

Then it's time to find some paint!

I could have opted for regular old acrylic paint, but I had this hammered silver spray paint in my closet and it begged to be used.


As you might notice in the pictures, some of my robots have different feet. I ran out of the nifty little bowl pieces. Boo! But, I had some craft sticks sitting around so I snapped off the rounded ends and darn it, they made cute feet too.


Behold my army of NaNoBots!

2 comments:

  1. Oh, no. They're speaking to me. They can look into my mind. They're multiplying. What have you created!?

    ReplyDelete
  2. I've created something evil, I'm sure. I seem to specialize in that.

    ReplyDelete

Join the conversation. It gets lonely in here without you.